DIN 11864/11853
General
DIN 11864 was first released 1998 and showed aseptic DIN connections with both long ends and short ends. From release 2006-01 of DIN 11864 it cover only connections with long ends. The versions with short end are moved to a new standard, DIN 11853.
The o-ring and it's groove are exactly the same in both standards.
In total there are 6 standards covering this assortment:
DIN 11864-1, Threaded connections with long ends
DIN 11864-2, Flange connections with long ends
DIN 11864-3, Clamp connections with long ends
DIN 11853-1, Threaded connections with short ends
DIN 11853-2, Flange connections with short ends
DIN 11853-3, Clamp connections with short ends
Comments to below part numbers
Screws and nuts are not included in flange versions.
Clamp ring is not included in clamp versions, there is just a reference to recommended clamp ring.
O-ring is not included below, it is found in chapter "Seals".
 | O-rings for DIN 11864/11853
Please see "Seals, O-rings for DIN 11864/11853" | | | |
| | | |
Aseptic DIN 11864-1 threaded -> DIN 11866 series A / EN 10357 series A tubes
 | Welding liner long
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Liner 11864-1/A 13.0x1.5 1.4404 | 13/10x1.5 | 27 | 21.9 | 41 | 12x3.5 | 90520-9863 | |
| Liner 11864-1/A 19.0x1.5 1.4404 | 19/16x1.5 | 27 | 27.9 | 41 | 18x3.5 | 90520-9864 | |
| Liner 11864-1/A 23.0x1.5 1.4404 | 23/20x1.5 | 26 | 35.9 | 43 | 22x3.5 | 90520-9865 | |
| Liner 11864-1/A 29.0x1.5 1.4404 | 29/26x1.5 | 26 | 42.9 | 43 | 28x3.5 | 90520-9866 | |
| Liner 11864-1/A 35.0x1.5 1.4404 | 35/32x1.5 | 32 | 48.9 | 48 | 34x5 | 90520-9867 | |
| Liner 11864-1/A 41.0x1.5 1.4404 | 41/38x1.5 | 31 | 54.9 | 48 | 40x5 | 90520-9868 | |
| Liner 11864-1/A 53.0x1.5 1.4404 | 53/50x1.5 | 30 | 66.9 | 48 | 52x5 | 90520-9869 | |
| Liner 11864-1/A 70.0x2.0 1.4404 | 70/66x2.0 | 40 | 84.9 | 60 | 68x5 | 90520-9870 | |
| Liner 11864-1/A 85.0x2.0 1.4404 | 85/81x2.0 | 40 | 98.9 | 64 | 83x5 | 90520-9871 | |
| Liner 11864-1/A 104x2.0 1.4404 | 104/100x2.0 | 40 | 118.9 | 64 | 102x5 | 90520-9459 | |
| | | | | | | | |
 | Welding male long
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut | Male p.11864-1/A 13.0x1.5 1.4404 | 13/10x1.5 | 27 | Rd28x1/8 | 41 | - | 90520-9872 | |
| Male p.11864-1/A 19.0x1.5 1.4404 | 19/16x1.5 | 27 | Rd34x1/8 | 41 | - | 90520-9873 | |
| Male p.11864-1/A 23.0x1.5 1.4404 | 23/20x1.5 | 26 | Rd44x1/6 | 43 | - | 90520-9874 | |
| Male p.11864-1/A 29.0x1.5 1.4404 | 29/26x1.5 | 26 | Rd52x1/6 | 43 | - | 90520-9875 | |
| Male p.11864-1/A 35.0x1.5 1.4404 | 35/32x1.5 | 32 | Rd58x1/6 | 48 | - | 90520-9876 | |
| Male p.11864-1/A 41.0x1.5 1.4404 | 41/38x1.5 | 31 | Rd65x1/6 | 48 | - | 90520-9877 | |
| Male p.11864-1/A 53.0x1.5 1.4404 | 53/50x1.5 | 30 | Rd78x1/6 | 48 | - | 90520-9878 | |
| Male p.11864-1/A 70.0x2.0 1.4404 | 70/66x2.0 | 40 | Rd95x1/6 | 60 | - | 90520-9879 | |
| Male p.11864-1/A 85.0x2.0 1.4404 | 85/81x2.0 | 40 | Rd110x1/4 | 64 | - | 90520-9880 | |
| Male p.11864-1/A 104x2.0 1.4404 | 104/100x2.0 | 40 | Rd130x1/4 | 64 | - | 90520-9454 | |
| | | | | | | | |
Aseptic DIN 11853-1 threaded -> DIN 11866 series A / EN 10357 series A tubes
| | Welding liner short
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Liner 11853-1/A DN10 1.4404 | 13/10x1.5 | 5 | 21.9 | 12x3.5 | 17.0 | 90511-8988 | |
| Liner 11853-1/A DN15 1.4404 | 19/16x1.5 | 5 | 27.9 | 18x3.5 | 17.0 | 90511-8989 | |
| Liner 11853-1/A DN20 1.4404 | 23/20x1.5 | 5 | 35.9 | 22x3.5 | 18.0 | 90511-8990 | |
| Liner 11853-1/A DN25 1.4404 | 29/26x1.5 | 8 | 42.9 | 28x3.5 | 22.0 | 90511-8991 | |
| Liner 11853-1/A DN32 1.4404 | 35/32x1.5 | 10 | 48.9 | 34x5 | 25.0 | 90511-8992 | |
| Liner 11853-1/A DN40 1.4404 | 41/38x1.5 | 10 | 54.9 | 40x5 | 26.0 | 90511-8993 | |
| Liner 11853-1/A DN50 1.4404 | 53/50x1.5 | 13 | 66.9 | 52x5 | 30.0 | 90511-8994 | |
| Liner 11853-1/A DN65 1.4404 | 70/66x2.0 | 15 | 84.9 | 68x5 | 34.0 | 90511-8995 | |
| Liner 11853-1/A DN80 1.4404 | 85/81x2.0 | 15 | 98.9 | 83x5 | 38.0 | 90511-8996 | |
| Liner 11853-1/A DN100 1.4404 | 104/100x2.0 | 23 | 118.9 | 102x5 | 46.0 | 90511-8997 | |
| | | | | | | | |
| | Welding male short
Semi bright
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut | Male p.11853-1/A DN10 1.4404 | 13/10x1.5 | 5 | Rd28x1/8 | - | 19.0 | 90511-8998 | |
| Male p.11853-1/A DN15 1.4404 | 19/16x1.5 | 5 | Rd34x1/8 | - | 19.0 | 90511-8999 | |
| Male p.11853-1/A DN20 1.4404 | 23/20x1.5 | 5 | Rd44x1/6 | - | 21.0 | 90511-9000 | |
| Male p.11853-1/A DN25 1.4404 | 29/26x1.5 | 10 | Rd52x1/6 | - | 26.0 | 90511-9001 | |
| Male p.11853-1/A DN32 1.4404 | 35/32x1.5 | 14 | Rd58x1/6 | - | 30.0 | 90511-9002 | |
| Male p.11853-1/A DN40 1.4404 | 41/38x1.5 | 15 | Rd65x1/6 | - | 31.0 | 90511-9003 | |
| Male p.11853-1/A DN50 1.4404 | 53/50x1.5 | 15 | Rd78x1/6 | - | 31.0 | 90511-9004 | |
| Male p.11853-1/A DN65 1.4404 | 70/66x2.0 | 16 | Rd95x1/6 | - | 36.0 | 90511-9005 | |
| Male p.11853-1/A DN80 1.4404 | 85/81x2.0 | 18 | Rd110x1/4 | - | 42.0 | 90511-9006 | |
| Male p.11853-1/A DN100 1.4404 | 104/100x2.0 | 26 | Rd130x1/4 | - | 50.0 | 90511-9007 | |
| | | | | | | | |
Blinds for DIN 11864-1 / DIN 11853-1 -> DIN 11866 series A / EN 10357 series A tubes
 | Blind liner
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Blank liner 11864/11853-1/A DN10 1.4404 | 21.9 | 9 | 12x3.5 | - | 90519-3691 | |
| Blank liner 11864/11853-1/A DN15 1.4404 | 27.9 | 9 | 18x3.5 | - | 90519-3692 | |
| Blank liner 11864/11853-1/A DN20 1.4404 | 35.9 | 10 | 22x3.5 | - | 90519-3693 | |
| Blank liner 11864/11853-1/A DN25 1.4404 | 42.9 | 12 | 28x3.5 | - | 90519-3694 | |
| Blank liner 11864/11853-1/A DN32 1.4404 | 48.9 | 13 | 34x5 | - | 90519-3695 | |
| Blank liner 11864/11853-1/A DN40 1.4404 | 54.9 | 13 | 40x5 | - | 90606-3400 | |
| Blank liner 11864/11853-1/A DN50 1.4404 | 66.9 | 14 | 52x5 | - | 90606-3399 | |
| Blank liner 11864/11853-1/A DN65 1.4404 | 84.9 | 16 | 68x5 | - | 90606-3398 | |
| Blank liner 11864/11853-1/A DN80 1.4404 | 98.9 | 16 | 83x5 | - | 90606-3397 | |
| Blank liner 11864/11853-1/A DN100 1.4404 | 118.9 | 20 | 102x5 | - | 90606-3396 | |
| | | | | | | |
 | Blind male part
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404 | Blank m. p. 11864/11853-1/A DN10 1.4404 | Rd 28x1/8 | 24 | - | 17 | 90519-3696 | |
| Blank m. p. 11864/11853-1/A DN15 1.4404 | Rd 34x1/8 | 24 | - | 17 | 90519-3697 | |
| Blank m. p. 11864/11853-1/A DN20 1.4404 | Rd 44x1/6 | 24 | - | 17 | 90519-3698 | |
| Blank m. p. 11864/11853-1/A DN25 1.4404 | Rd 52x1/6 | 24 | - | 27 | 90519-3699 | |
| Blank m. p. 11864/11853-1/A DN32 1.4404 | Rd 58x1/6 | 24 | - | 27 | 90519-3700 | |
| Blank m. p. 11864/11853-1/A DN40 1.4404 | Rd 65x1/6 | 24 | - | 27 | 90519-3701 | |
| Blank m. p. 11864/11853-1/A DN50 1.4404 | Rd 78x1/6 | 24 | - | 27 | 90519-3702 | |
| Blank m. p. 11864/11853-1/A DN65 1.4404 | Rd 95x1/6 | 28 | - | 32 | 90519-3703 | |
| Blank m. p. 11864/11853-1/A DN80 1.4404 | Rd 110x1/4 | 28 | - | 32 | 90519-3704 | |
| Blank m. p. 11864/11853-1/A DN100 1.4404 | Rd_130x1/4 | 30 | - | 32 | 90519-3705 | |
| | | | | | | |
Nut for DIN 11864-1 and DIN 11853-1
 | Nut
Semi bright
(Also fit DIN 11851 connections)
Material: EN 1.4301 | DIN11851 DN10 1.4301 | 38.0 | 18.0 | Rd28x1/8 | 90511-9008 | |
| DIN11851 DN15 1.4301 | 44.0 | 18.0 | Rd34x1/8 | 90511-9009 | |
| DIN11851 DN20 1.4301 | 54.0 | 20.0 | Rd44x1/6 | 90511-9010 | |
| DIN11851 DN25 1.4301 | 63.0 | 21.0 | Rd52x1/6 | 90511-9011 | |
| DIN11851 DN32 1.4301 | 70.0 | 21.0 | Rd58x1/6 | 90511-9012 | |
| DIN11851 DN40 1.4301 | 78.0 | 21.0 | Rd65x1/6 | 90511-9013 | |
| DIN11851 DN50 1.4301 | 92.0 | 22.0 | Rd78x1/6 | 90511-9014 | |
| DIN11851 DN65 1.4301 | 112.0 | 25.0 | Rd95x1/6 | 90511-9015 | |
| DIN11851 DN80 1.4301 | 127.0 | 29.0 | Rd110x1/4 | 90511-9016 | |
| DIN11851 DN100 1.4301 | 148.0 | 31.0 | Rd130x1/4 | 90511-9017 | |
| | | | | | |
Aseptic DIN 11864-2 flange -> DIN 11866 series A / EN 10357 series A tubes
 | Grooved flange long
"Nutflansch" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Grooved fl. 11864-2/A DN10 1.4404 | 13x1.5 | 37 | 9 | 41.5 | 4xM8x30 | 26 | 12x3.5 | 90521-2565 | |
| Grooved fl. 11864-2/A DN15 1.4404 | 19x1.5 | 42 | 9 | 41.5 | 4xM8x30 | 26 | 18x3.5 | 90521-2566 | |
| Grooved fl. 11864-2/A DN20 1.4404 | 23x1.5 | 47 | 9 | 41.5 | 4xM8x30 | 26 | 22x3.5 | 90521-2567 | |
| Grooved fl. 11864-2/A DN25 1.4404 | 29x1.5 | 53 | 9 | 41.5 | 4xM8x30 | 26 | 28x3.5 | 90521-2568 | |
| Grooved fl. 11864-2/A DN32 1.4404 | 35x1.5 | 59 | 9 | 46.5 | 4xM8x30 | 31 | 34x5 | 90521-2569 | |
| Grooved fl. 11864-2/A DN40 1.4404 | 41x1.5 | 65 | 9 | 46.5 | 4xM8x30 | 31 | 40x5 | 90521-2570 | |
| Grooved fl. 11864-2/A DN50 1.4404 | 53x1.5 | 77 | 9 | 46.5 | 4xM8x30 | 31 | 52x5 | 90521-2571 | |
| Grooved fl. 11864-2/A DN65 1.4404 | 70x2.0 | 95 | 9 | 55.5 | 8xM8x30 | 42 | 68x5 | 90521-2572 | |
| Grooved fl. 11864-2/A DN80 1.4404 | 85x2.0 | 112 | 11 | 59.5 | 8xM10x35 | 42 | 83x5 | 90521-2573 | |
| Grooved fl. 11864-2/A DN100 1.4404 | 104x2.0 | 137 | 11 | 59.5 | 8xM10x40 | 42 | 102x5 | 90520-9138 | |
| Grooved fl. 11864-2/A DN125 1.4404 | 129x2.0 | 161 | 11 | 61.5 | 8xM10x40 | 42 | 127x5 | 90520-9885 | |
| Grooved fl. 11864-2/A DN150 1.4404 | 154x2.0 | 188 | 11 | 61.5 | 8xM10x40 | 40 | 152x5 | 90520-2995 | |
| | | | | | | | | | |
 | Liner flange long
"Bundflansch"
ID surface: <0.8µm
Material: EN 1.4404 | Liner fl. 11864-2/A DN10 1.4404 | 13x1.5 | 37 | 9 | 40 | 4xM8x30 | 26 | - | 90521-2556 | |
| Liner fl. 11864-2/A DN15 1.4404 | 19x1.5 | 42 | 9 | 40 | 4xM8x30 | 26 | - | 90521-2557 | |
| Liner fl. 11864-2/A DN20 1.4404 | 23x1.5 | 47 | 9 | 40 | 4xM8x30 | 26 | - | 90521-2558 | |
| Liner fl. 11864-2/A DN25 1.4404 | 29x1.5 | 53 | 9 | 40 | 4xM8x30 | 26 | - | 90521-2559 | |
| Liner fl. 11864-2/A DN32 1.4404 | 35x1.5 | 59 | 9 | 45 | 4xM8x30 | 31 | - | 90521-2560 | |
| Liner fl. 11864-2/A DN40 1.4404 | 41x1.5 | 65 | 9 | 45 | 4xM8x30 | 31 | - | 90521-2561 | |
| Liner fl. 11864-2/A DN50 1.4404 | 53x1.5 | 77 | 9 | 45 | 4xM8x30 | 31 | - | 90521-2562 | |
| Liner fl. 11864-2/A DN65 1.4404 | 70x2.0 | 95 | 9 | 54 | 8xM8x30 | 42 | - | 90521-2563 | |
| Liner fl. 11864-2/A DN80 1.4404 | 85x2.0 | 112 | 11 | 58 | 8xM10x35 | 42 | - | 90521-2564 | |
| Liner fl. 11864-2/A DN100 1.4404 | 104x2.0 | 137 | 11 | 58 | 8xM10x40 | 42 | - | 90512-5188 | |
| Liner fl. 11864-2/A DN125 1.4404 | 129x2.0 | 161 | 11 | 60 | 8xM10x40 | 42 | - | 90512-5189 | |
| Liner fl. 11864-2/A DN150 1.4404 | 154x2.0 | 188 | 14 | 60 | 8xM10x40 | 40 | - | 90512-5190 | |
| | | | | | | | | | |
Aseptic DIN 11853-2 flange -> DIN 11866 series A / EN 10357 series A tubes
| | Grooved flange short
"Nutflansch" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Grooved fl. 11853-2/A DN10 1.4404 | 13x1.5 | 25.5 | 37 | 10 | 9 | 4xM8x30 | 12x3.5 | 90521-4970 | |
| Grooved fl. 11853-2/A DN15 1.4404 | 19x1.5 | 25.5 | 42 | 10 | 9 | 4xM8x30 | 18x3.5 | 90521-4971 | |
| Grooved fl. 11853-2/A DN20 1.4404 | 23x1.5 | 25.5 | 47 | 10 | 9 | 4xM8x30 | 22x3.5 | 90521-4972 | |
| Grooved fl. 11853-2/A DN25 1.4404 | 29x1.5 | 25.5 | 53 | 10 | 9 | 4xM8x30 | 28x3.5 | 90521-4973 | |
| Grooved fl. 11853-2/A DN32 1.4404 | 35x1.5 | 25.5 | 59 | 10 | 9 | 4xM8x30 | 34x5 | 90521-4974 | |
| Grooved fl. 11853-2/A DN40 1.4404 | 41x1.5 | 25.5 | 65 | 10 | 9 | 4xM8x30 | 40x5 | 90521-4975 | |
| Grooved fl. 11853-2/A DN50 1.4404 | 53x1.5 | 25.5 | 77 | 10 | 9 | 4xM8x30 | 52x5 | 90521-4976 | |
| Grooved fl. 11853-2/A DN65 1.4404 | 70x2.0 | 25.5 | 95 | 10 | 9 | 8xM8x30 | 68x5 | 90521-4977 | |
| Grooved fl. 11853-2/A DN80 1.4404 | 85x2.0 | 27.5 | 112 | 10 | 11 | 8xM10x35 | 83x5 | 90521-4978 | |
| Grooved fl. 11853-2/A DN100 1.4404 | 104x2.0 | 27.5 | 137 | 10 | 11 | 8xM10x40 | 102x5 | 90511-9045 | |
| Grooved fl. 11853-2/A DN125 1.4404 | 129x2.0 | 29.5 | 161 | 10 | 11 | 8xM10x40 | 127x5 | 90511-9046 | |
| Grooved fl. 11853-2/A DN150 1.4404 | 154x2.0 | 29.5 | 188 | 8 | 14 | 8xM12x50 | 152x5 | 90511-9047 | |
| | | | | | | | | | |
| | Liner flange
"Bundflansch"
ID surface: <0.8µm
Material: EN 1.4404 | Liner fl. 11853-2/A DN10 1.4404 | 13x1.5 | 24 | 37 | 10 | 9 | 4xM8x30 | - | 90521-4961 | |
| Liner fl. 11853-2/A DN15 1.4404 | 19x1.5 | 24 | 42 | 10 | 9 | 4xM8x30 | - | 90521-4962 | |
| Liner fl. 11853-2/A DN20 1.4404 | 23x1.5 | 24 | 47 | 10 | 9 | 4xM8x30 | - | 90521-4963 | |
| Liner fl. 11853-2/A DN25 1.4404 | 29x1.5 | 24 | 53 | 10 | 9 | 4xM8x30 | - | 90521-4964 | |
| Liner fl. 11853-2/A DN32 1.4404 | 35x1.5 | 24 | 59 | 10 | 9 | 4xM8x30 | - | 90521-4965 | |
| Liner fl. 11853-2/A DN40 1.4404 | 41x1.5 | 24 | 65 | 10 | 9 | 4xM8x30 | - | 90521-4966 | |
| Liner fl. 11853-2/A DN50 1.4404 | 53x1.5 | 24 | 77 | 10 | 9 | 4xM8x30 | - | 90521-4967 | |
| Liner fl. 11853-2/A DN65 1.4404 | 70x2.0 | 24 | 95 | 10 | 9 | 8xM8x30 | - | 90521-4968 | |
| Liner fl. 11853-2/A DN80 1.4404 | 85x2.0 | 26 | 112 | 10 | 11 | 8xM10x35 | - | 90521-4969 | |
| Liner fl. 11853-2/A DN100 1.4404 | 104x2.0 | 26 | 137 | 10 | 11 | 8xM10x40 | - | 90511-9042 | |
| Liner fl. 11853-2/A DN125 1.4404 | 129x2.0 | 28 | 161 | 10 | 11 | 8xM10x40 | - | 90511-9043 | |
| Liner fl. 11853-2/A DN150 1.4404 | 154x2.0 | 28 | 188 | 8 | 14 | 8xM12x50 | - | 90511-9044 | |
| | | | | | | | | | |
Blinds for DIN 11864-2 / DIN 11853-2 -> DIN 11866 series A / EN 10357 series A tubes
 | Blind flange liner with groove
"Nutflansch" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Bl.fl.w.gr. 11864/11853-2/A DN10 1.4404 | 37 | 11.5 | 12x3.5 | 90521-2574 | |
| Bl.fl.w.gr. 11864/11853-2/A DN15 1.4404 | 42 | 11.5 | 18x3.5 | 90521-2575 | |
| Bl.fl.w.gr. 11864/11853-2/A DN20 1.4404 | 47 | 11.5 | 22x3.5 | 90521-2576 | |
| Bl.fl.w.gr. 11864/11853-2/A DN25 1.4404 | 53 | 11.5 | 28x3.5 | 90521-2577 | |
| Bl.fl.w.gr. 11864/11853-2/A DN32 1.4404 | 59 | 11.5 | 34x5 | 90521-2578 | |
| Bl.fl.w.gr. 11864/11853-2/A DN40 1.4404 | 65 | 11.5 | 40x5 | 90521-2579 | |
| Bl.fl.w.gr. 11864/11853-2/A DN50 1.4404 | 77 | 11.5 | 52x5 | 90521-2580 | |
| Bl.fl.w.gr. 11864/11853-2/A DN65 1.4404 | 95 | 11.5 | 68x5 | 90521-2581 | |
| Bl.fl.w.gr. 11864/11853-2/A DN80 1.4404 | 112 | 13.5 | 83x5 | 90521-2582 | |
| Bl.fl.w.gr. 11864/11853-2/A DN100 1.4404 | 137 | 15.5 | 102x5 | 90520-9882 | |
| Bl.fl.w.gr. 11864/11853-2/A DN125 1.4404 | 161 | 15.5 | 127x5 | 90520-9883 | |
| Bl.fl.w.gr. 11864/11853-2/A DN150 1.4404 | 188 | 17.5 | 152x5 | 90520-9884 | |
| | | | | | |
 | Blind flange liner
"Bundflansch"
ID surface: <0.8µm
Material: EN 1.4404 | Bl.fl.Liner 11864/11853-2/A DN10 1.4404 | 37 | 10 | - | 90521-2583 | |
| Bl.fl.Liner 11864/11853-2/A DN15 1.4404 | 42 | 10 | - | 90521-2584 | |
| Bl.fl.Liner 11864/11853-2/A DN20 1.4404 | 47 | 10 | - | 90521-2585 | |
| Bl.fl.Liner 11864/11853-2/A DN25 1.4404 | 53 | 10 | - | 90521-2586 | |
| Bl.fl.Liner 11864/11853-2/A DN32 1.4404 | 59 | 10 | - | 90521-2587 | |
| Bl.fl.Liner 11864/11853-2/A DN40 1.4404 | 65 | 10 | - | 90521-2588 | |
| Bl.fl.Liner 11864/11853-2/A DN50 1.4404 | 77 | 10 | - | 90521-2589 | |
| Bl.fl.Liner 11864/11853-2/A DN65 1.4404 | 95 | 10 | - | 90521-2590 | |
| Bl.fl.Liner 11864/11853-2/A DN80 1.4404 | 112 | 12 | - | 90521-2591 | |
| Bl.fl.liner 11864/11853-2/A DN100 1.4404 | 137 | 14 | - | 90520-9881 | |
| Bl.fl.liner 11864/11853-2/A DN125 1.4404 | 161 | 14 | - | 90518-8864 | |
| Bl.fl.liner 11864/11853-2/A DN150 1.4404 | 188 | 16 | - | 90520-3017 | |
| | | | | | |
Aseptic DIN 11864-1 threaded -> DIN 11866 series C / BS 4825 tubes
| | Welding liner long
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Liner 11864-1/A 1/2" 1.4404 H3 long | 12.7x1.65 | 27 | 21.9 | 39 | 12x3.5 | 90517-4450 | |
| Liner 11864-1/A 3/4" 1.4404 H3 long | 19.05x1.65 | 27 | 27.9 | 39 | 18x3.5 | 90517-4451 | |
| Liner 11864-1/A 1" 1.4404 H3 long | 25.4x1.65 | 26 | 42.9 | 40 | 24x3.5 | 90517-4452 | |
| Liner 11864-1/A 1-1/2" 1.4404 H3 long | 38.1x1.65 | 30 | 54.9 | 46.5 | 37x5 | 90517-4518 | |
| Liner 11864-1/A 2" 1.4404 H3 long | 50.8x1.65 | 30 | 66.9 | 47.5 | 50x5 | 90517-4519 | |
| Liner 11864-1/A 2-1/2" 1.4404 H3 long | 63.5x1.65 | 40 | 84.9 | 63 | 62x5 | 90517-4520 | |
| Liner 11864-1/A 3" 1.4404 H3 long | 76.2x1.65 | 40 | 98.9 | 61 | 75x5 | 90517-4521 | |
| Liner 11864-1/A 4" 1.4404 H3 long | 101.6x2.11 | 40 | 118.9 | 65 | 100x5 | 90517-4522 | |
| | | | | | | | |
| | Welding male long
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut | Male p. 11864-1/A 1/2" 1.4404 H3 long | 12.7x1.65 | 27 | Rd28x1/8 | 41 | - | 90517-4434 | |
| Male p. 11864-1/A 3/4" 1.4404 H3 long | 19.05x1.65 | 27 | Rd34x1/8 | 41 | - | 90517-4435 | |
| Male p. 11864-1/A 1" 1.4404 H3 long | 25.4x1.65 | 26 | Rd52x1/6 | 43 | - | 90517-4436 | |
| Male p. 11864-1/A 1-1/2" 1.4404 H3 long | 38.1x1.65 | 30 | Rd65x1/6 | 48.5 | - | 90517-4437 | |
| Male p. 11864-1/A 2" 1.4404 H3 long | 50.8x1.65 | 30 | Rd78x1/6 | 48.5 | - | 90517-4438 | |
| Male p. 11864-1/A 2-1/2" 1.4404 H3 long | 63.5x1.65 | 40 | Rd95x1/6 | 60 | - | 90517-4439 | |
| Male p. 11864-1/A 3" 1.4404 H3 long | 76.2x1.65 | 40 | Rd110x1/4 | 64 | - | 90517-4440 | |
| Male p. 11864-1/A 4" 1.4404 H3 long | 101.6x2.11 | 40 | Rd130x1/4 | 64 | - | 90517-4441 | |
| | | | | | | | |
Aseptic DIN 11853-1 threaded -> DIN 11866 series C / BS 4825 tubes
| | Welding liner short
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Liner 11853-1/A 1/2" 12.7x1.65 short | 12.7x1.65 | 6.5 | 21.9 | 17 | 12x3.5 | 90517-4555 | |
| Liner 11853-1/A 3/4" 19.05x1.65 short | 19.05x1.65 | 6.5 | 27.9 | 17 | 18x3.5 | 90517-4556 | |
| Liner 11853-1/A 1" 25.4x1.65 short | 25.4x1.65 | 8 | 42.9 | 22 | 24x3.5 | 90517-4557 | |
| Liner 11853-1/A 1-1/2" 38.1x1.65 short | 38.1x1.65 | 9.5 | 54.9 | 26 | 37x5 | 90517-4558 | |
| Liner 11853-1/A 2" 50.8x1.65 short | 50.8x1.65 | 12.5 | 66.9 | 30 | 50x5 | 90517-4559 | |
| Liner 11853-1/A 2-1/2" 63.5x1.65 short | 63.5x1.65 | 21 | 84.9 | 34 | 62x5 | 90517-4560 | |
| Liner 11853-1/A 3" 76.2x1.65 short | 76.2x1.65 | 17 | 98.9 | 38 | 75x5 | 90517-4561 | |
| Liner 11853-1/A 4" 101.6x2.11 short | 101.6x2.11 | 21 | 118.9 | 46 | 100x5 | 90517-4562 | |
| | | | | | | | |
| | Welding male short
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut | Male p. 11853-1/A 1/2" 1.4404 H3 short | 12.7x1.65 | 5 | Rd28x1/8 | 19 | - | 90517-4442 | |
| Male p. 11853-1/A 3/4" 1.4404 H3 short | 19.05x1.65 | 5 | Rd34x1/8 | 19 | - | 90517-4443 | |
| Male p. 11853-1/A 1" 1.4404 H3 short | 25.4x1.65 | 10 | Rd52x1/6 | 26 | - | 90517-4444 | |
| Male p. 11853-1/A 1-1/2" 1.4404 H3 short | 38.1x1.65 | 15 | Rd65x1/6 | 31 | - | 90517-4445 | |
| Male p. 11853-1/A 2" 1.4404 H3 short | 50.8x1.65 | 15 | Rd78x1/6 | 31 | - | 90517-4446 | |
| Male p. 11853-1/A 2-1/2" 1.4404 H3 short | 63.5x1.65 | 18 | Rd95x1/6 | 36 | - | 90517-4447 | |
| Male p. 11853-1/A 3" 1.4404 H3 short | 76.2x1.65 | 18 | Rd110x1/4 | 42 | - | 90517-4448 | |
| Male p. 11853-1/A 4" 1.4404 H3 short | 101.6x2.11 | 26 | Rd130x1/4 | 50 | - | 90517-4449 | |
| | | | | | | | |
Blinds for DIN 11864-1 / DIN 11853-1 -> DIN 11866 series C / BS 4825 tubes
| | Blind liner
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Blank liner 11864/11853-1/A 0.5" 1.4404 | 21.9 | 9 | 12x3.5 | - | 90517-4539 | |
| Blank liner 11864/11853-1/A 0.75" 1.4404 | 27.9 | 9 | 18x3.5 | - | 90517-4540 | |
| Blank liner 11864/11853-1/A 1" 1.4404 | 42.9 | 12 | 24x3.5 | - | 90517-4541 | |
| Blank liner 11864/11853-1/A 1.5" 1.4404 | 54.9 | 13 | 37x5 | - | 90517-4542 | |
| Blank liner 11864/11853-1/A 2" 1.4404 | 66.9 | 14 | 50x5 | - | 90517-4543 | |
| Blank liner 11864/11853-1/A 2.5" 1.4404 | 84.9 | 16 | 62x5 | - | 90517-4544 | |
| Blank liner 11864/11853-1/A 3" 1.4404 | 98.9 | 16 | 75x5 | - | 90517-4545 | |
| Blank liner 11864/11853-1/A 4" 1.4404 | 118.9 | 20 | 100x5 | - | 90517-4546 | |
| | | | | | | |
| | Blind male part
"Gewindestutzen"
ID surface: <0.8µm
Material: EN 1.4404 | Blank m. p. 11864/11853-1/A 0.5" 1.4404 | Rd28x1/8 | 24 | - | 17 | 90517-4547 | |
| Blank m. p. 11864/11853-1/A 0.75" 1.4404 | Rd34x1/8 | 24 | - | 17 | 90517-4548 | |
| Blank m. p. 11864/11853-1/A 1" 1.4404 | Rd52x1/6 | 24 | - | 27 | 90517-4549 | |
| Blank m. p. 11864/11853-1/A 1.5" 1.4404 | Rd65x1/6 | 24 | - | 27 | 90517-4550 | |
| Blank m. p. 11864/11853-1/A 2" 1.4404 | Rd78x1/6 | 24 | - | 27 | 90517-4551 | |
| Blank m. p. 11864/11853-1/A 2.5" 1.4404 | Rd95x1/6 | 28 | - | 32 | 90517-4552 | |
| Blank m. p. 11864/11853-1/A 3" 1.4404 | Rd110x1/4 | 28 | - | 32 | 90517-4553 | |
| Blank m. p. 11864/11853-1/A 4" 1.4404 | Rd130x1/4 | 30 | - | 32 | 90517-4554 | |
| | | | | | | |
Aseptic DIN 11864-2 flange -> DIN 11866 series C / BS 4825 tubes
| | Grooved flange long
"Nutflansch" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Gr. flange 11864-2/A 1/2" 1.4404 | 12.7x1.65 | 37 | 9 | 40 | 4xM8x30 | 26 | 12x3.5 | 90517-4523 | |
| Gr. flange 11864-2/A 3/4" 1.4404 | 19.05x1.65 | 42 | 9 | 40 | 4xM8x30 | 26 | 18x3.5 | 90517-4524 | |
| Gr. flange 11864-2/A 1" 1.4404 | 25.4x1.65 | 49 | 9 | 40 | 4xM8x30 | 26 | 24x3.5 | 90517-4525 | |
| Gr. flange 11864-2/A 1-1/2" 1.4404 | 38.1x1.65 | 62 | 9 | 45 | 4xM8x30 | 31 | 37x3.5 | 90517-4526 | |
| Gr. flange 11864-2/A 2" 1.4404 | 50.8x1.65 | 75 | 9 | 45 | 4xM8x30 | 31 | 50x5 | 90517-4527 | |
| Gr. flange 11864-2/A 2-1/2" 1.4404 | 63.5x1.65 | 89 | 9 | 54 | 8xM8x30 | 42 | 62x5 | 90517-4528 | |
| Gr. flange 11864-2/A 3" 1.4404 | 76.2x1.65 | 104 | 11 | 56 | 8xM10x30 | 42 | 75x5 | 90517-4529 | |
| Gr. flange 11864-2/A 4" 1.4404 | 101.6x2.11 | 135 | 11 | 58 | 8xM10x35 | 42 | 100x5 | 90517-4530 | |
| | | | | | | | | | |
| | Liner flange long
"Bundflansch"
ID surface: <0.8µm
Material: EN 1.4404 | Liner flange11864-2/A 1/2" 1.4404 | 12.7x1.65 | 37 | 9 | 41.5 | 4xM8x30 | 26 | - | 90517-4531 | |
| Liner flange11864-2/A 3/4" 1.4404 | 19.05x1.65 | 42 | 9 | 41.5 | 4xM8x30 | 26 | - | 90517-4532 | |
| Liner flange11864-2/A 1" 1.4404 | 25.4x1.65 | 49 | 9 | 41.5 | 4xM8x30 | 26 | - | 90517-4533 | |
| Liner flange11864-2/A 1-1/2" 1.4404 | 38.1x1.65 | 62 | 9 | 46.5 | 4xM8x30 | 31 | - | 90517-4534 | |
| Liner flange11864-2/A 2" 1.4404 | 50.8x1.65 | 75 | 9 | 46.5 | 4xM8x30 | 31 | - | 90517-4535 | |
| Liner flange11864-2/A 2-1/2" 1.4404 | 63.5x1.65 | 89 | 9 | 55.5 | 4xM8x30 | 42 | - | 90517-4536 | |
| Liner flange11864-2/A 3" 1.4404 | 76.2x1.65 | 104 | 11 | 57.5 | 8xM10x30 | 42 | - | 90517-4537 | |
| Liner flange11864-2/A 4" 1.4404 | 101.6x2.11 | 135 | 11 | 59.5 | 8xM10x35 | 42 | - | 90517-4538 | |
| | | | | | | | | | |
Blinds for DIN 11864-2 / DIN 11853-2 -> DIN 11866 series C / BS 4825 tubes
| | Blind flange liner with groove
Semi bright "Nutflansch" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Bl.fl.w.gr. 11864/11853-2/A 4" 1.4404 | 135 | 15.5 | 100x5 | 90520-8392 | |
| | | | | | |
| | Blind flange liner
Semi bright "Bundflansch"
ID surface: <0.8µm
Material: EN 1.4404 | Bl.fl.liner 11864/11853-2/A 4" 1.4404 | 135 | 14 | - | 90520-8403 | |
| | | | | | |
Aseptic DIN 11864-3 clamp -> DIN 11866 series C / BS 4825 tubes
 | Clamp liner long with groove
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
Rec. clamp not included | Cl. w. gr. 11864-3/A 1/2" 1.4404 | 12.7x1.65 | 34 | 39.5 | 26 | 12x3.5 | 6_9611993113 | 90518-8745 | |
| Cl. w. gr. 11864-3/A 3/4" 1.4404 | 19.05x1.65 | 34 | 39.5 | 26 | 18x3.5 | 6-9611993113 | 90518-8746 | |
| Cl. w. gr. 11864-3/A 1" 1.4404 | 25.4x1.65 | 50.5 | 40 | 28 | 24x3.5 | 6-211053 | 90518-8747 | |
| Cl. w. gr. 11864-3/A 1-1/2" 1.4404 | 38.1x1.65 | 64 | 45.5 | 30 | 37x5 | 6-211054 | 90518-8748 | |
| Cl. w. gr. 11864-3/A 2" 1.4404 | 50.8x1.65 | 77.5 | 46 | 30 | 50x5 | 6-211055 | 90518-8749 | |
| Cl. w. gr. 11864-3/A 2-1/2" 1.4404 | 63.5x1.65 | 91 | 59 | 40 | 62x5 | 6-211056 | 90518-8750 | |
| Cl. w. gr. 11864-3/A 3" 1.4404 | 76.2x1.65 | 106 | 60 | 40 | 75x5 | 6-9611993114 | 90518-8751 | |
| Cl. w. gr. 11864-3/A 4" 1.4404 | 101.6x2.11 | 130 | 61 | 40 | 100x5 | 6-9611994192 | 90518-8752 | |
| | | | | | | | | |
 | Clamp liner long
ID surface: <0.8µm
Material: EN 1.4404 | Clamp liner 11864-3/A 1/2" 1.4404 | 12.7x1.65 | 34 | 38 | 26 | - | - | 90518-8753 | |
| Clamp liner 11864-3/A 3/4" 1.4404 | 19.05x1.65 | 34 | 38 | 26 | - | - | 90518-8754 | |
| Clamp liner 11864-3/A 1" 1.4404 | 25.4x1.65 | 50.5 | 38.5 | 28 | - | - | 90518-8755 | |
| Clamp liner 11864-3/A 1-1/2" 1.4404 | 38.1x1.65 | 64 | 44 | 30 | - | - | 90518-8756 | |
| Clamp liner 11864-3/A 2" 1.4404 | 50.8x1.65 | 77.5 | 44.5 | 30 | - | - | 90518-8757 | |
| Clamp liner 11864-3/A 2-1/2" 1.4404 | 63.5x1.65 | 91 | 57.5 | 40 | - | - | 90518-8928 | |
| Clamp liner 11864-3/A 3" 1.4404 | 76.2x1.65 | 106 | 58.5 | 40 | - | - | 90518-8929 | |
| Clamp liner 11864-3/A 4" 1.4404 | 101.6x2.11 | 130 | 59.5 | 40 | - | - | 90518-8930 | |
| | | | | | | | | |
Aseptic DIN 11853-3 clamp -> DIN 11866 series C / BS 4825 tubes
 | Clamp liner short with groove
"Bundstutzen" with groove for o-ring type "Form A"
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included | Cl. w. gr. 11853-3/A 1/2" 1.4404 | 12.7x1.65 | 34 | 23.5 | 10 | 12x3.5 | 6_9611993113 | 90517-9192 | |
| Cl. w. gr. 11853-3/A 3/4" 1.4404 | 19.05x1.65 | 34 | 23.5 | 10 | 18x3.5 | 6_9611993113 | 90517-9193 | |
| Cl. w. gr. 11853-3/A 1" 1.4404 | 25.4x1.65 | 50.5 | 23.5 | 10 | 24x3.5 | 6-211053 | 90517-9194 | |
| Cl. w. gr. 11853-3/A 1 1/2" 1.4404 | 38.1x1.65 | 64 | 25.5 | 10 | 37x5 | 6-211054 | 90517-9195 | |
| Cl. w. gr. 11853-3/A 2" 1.4404 | 50.8x1.65 | 77.5 | 26 | 10 | 50x5 | 6-211055 | 90517-9196 | |
| Cl. w. gr. 11853-3/A 2 1/2" 1.4404 | 63.5x1.65 | 91 | 29 | 10 | 62x5 | 6-211056 | 90517-9197 | |
| Cl. w. gr. 11853-3/A 3" 1.4404 | 76.2x1.65 | 106 | 30 | 10 | 75x5 | 6-9611993114 | 90517-9198 | |
| Cl. w. gr. 11853-3/A 4" 1.4404 | 101.6x2.11 | 130 | 31 | 10 | 100x5 | 6-9611994192 | 90517-9199 | |
| | | | | | | | | |
 | Clamp liner short
ID surface: <0.8µm
Material: EN 1.4404 | Clamp liner 11853-3/A 1/2" 1.4404 | 12.7x1.65 | 34 | 22 | 10 | - | - | 90517-9200 | |
| Clamp liner 11853-3/A 3/4" 1.4404 | 19.05x1.65 | 34 | 22 | 10 | - | - | 90517-9201 | |
| Clamp liner 11853-3/A 1" 1.4404 | 25.4x1.65 | 50.5 | 22 | 10 | - | - | 90517-9202 | |
| Clamp liner 11853-3/A 1 1/2" 1.4404 | 38.1x1.65 | 64 | 24 | 10 | - | - | 90517-9203 | |
| Clamp liner 11853-3/A 2" 1.4404 | 50.8x1.65 | 77.5 | 24.5 | 10 | - | - | 90517-9204 | |
| Clamp liner 11853-3/A 2 1/2" 1.4404 | 63.5x1.65 | 91 | 27.5 | 10 | - | - | 90517-9205 | |
| Clamp liner 11853-3/A 3" 1.4404 | 76.2x1.65 | 106 | 28.5 | 10 | - | - | 90517-9206 | |
| Clamp liner 11853-3/A 4" 1.4404 | 101.6x2.11 | 130 | 29.5 | 10 | - | - | 90517-9207 | |
| | | | | | | | | |